ROTHOBLAAS Plasterable Window Tape IN/OUT – 25 m x 75 mm Roll

UPC/EAN code: PLASTIN1560 / PLASTOUT1560
SKU code: CCPE.RB/IN.2575BL / CCPE.RB/OUT.2575NG

CHARACTERISTICS

- High adhesion: Adheres very well to most common surfaces (wood, OSB, brick, concrete, etc.), even at low temperatures.

- Plasterable technical fabric: Allows the tape to be covered with plaster or coatings without any problems, achieving a clean, aesthetic finish and completely concealing the tape.

- Pre-cut liner: Facilitates quick and precise installation, even in corners or tight spaces, without the risk of tearing when removed.

- Vapour control and airtightness: Both control the passage of air and vapour, contributing to an airtight building envelope.

- PLASTER IN: Acts as a stronger vapour barrier (Sd ≈ 22 m), with lower vapour permeability, designed for interior use. It can be applied from +5°C. 

- PLASTER OUT: It is more breathable (Sd ≈ 2 m), waterproof (class W1), and resistant to heavy rain and UV rays for several months. It can be applied at temperatures as low as -10°C and is more robust for outdoor conditions. 

APPLICATIONS

- PLASTER IN:  Mainly used indoors to seal joints between panels, window and door frames, wall junctions, or joints in timber structures. It is ideal for ensuring airtightness on the warm side of the building envelope, preventing air infiltration that could lead to condensation or energy loss. It is recommended for use on smooth substrates such as timber or OSB; on brick or concrete, it is advisable to use a primer. 

- PLASTER OUT: Sealing of breathable membranes, joints on façades, joinery frames on the cold side, or protection against water and wind. Its breathability allows moisture to escape to the outside, whilst protecting against driving rain.

 
Both versions can be rolled over after application to ensure perfect adhesion.