VELCRO High Frequency Tape
  • VELCRO High Frequency Tape
  • VELCRO High Frequency Tape

VELCRO® Thermo Tape - HF (High Frequency) Adhesive White - 25m x 50mm Roll

Unit price per quantity VAT inc.

"The Velcro consists of 2 parts (male and female) that are sold separately" (See dropdown tab below)

Colour
Velcro

Volume discounts

Quantity Price You Save
5 €36.49 Up to €9.64
10 €34.67 Up to €37.50
Since €34.67 / u. VAT inc.
Cor Velcro 1-4 5-9 10 +
White Macho-Hook €38.42 €36.49 €34.67
White Hembra-Loop €38.42 €36.49 €34.67
Delivery time
Quantity
There are not enough products in stock 0

VELCRO® Thermo Tape - HF (High Frequency) Adhesive White - 25m x 50mm Roll

White Hook                     White Loop 
UPC/EAN code:  UPC/EAN code:
SKU code: VEM-TA-50B SKU code: VEH-TA-50B

 

THERMO-ADHESIVE TEXTILE VELCRO® TAPE

 

 

- Temperature performance from -30°C to +80°C

 

- The specific ambient temperature in which the adhesive still maintains good holding strength, depends largely on the surface, humidity and applied load

 

- Welding can be done through a high frequency machine, heat or solvents (acetone, M.E.K., ...)

 

- If the glue is activated with heat and solvents, after a few minutes the tape can be subjected to tension

 

 

 

IMPORTANT : make sure that the surface is compatible with these products.

 

 

- Minimum activation temperature: 100°C

 

- Application at room temperature (around 20°C)

 

- Press the tape with adhesive to the substrate firmly

 

- The adhesive must not be peeled off or reused

 

 - Must be free of oil, grease, dust, moisture, loose particles, silicone and certain plasticizers

 

- Must not be uneven, brittle, soft or unstable

 

- Must not have worn paint or coatings

 

- They must be suitable for gluing on them

 

- Must allow good adhesion with adhesive coating - e.g.: wood, cellulosic materials, various plastics (including P.V.C.) and leather

 

 - It is suitable on polystyrene, but due to the type of substrate you must be careful with the temperature

 

 

Polyamide tape closures are made up of two well-differentiated parts:

Female part (loop) and male part (hook)

 

The woven tape with hooks (male) is made up of small hooks that are attached to the part formed by soft loops (female).

 

A highly secure closure is produced and ready to be used on many occasions.

 

Very easy closure with a single pressure.

 

Adjustable and repositionable. We can rectify the joints at any time.

 

It is reusable. Allows to open/close for several hundred times.

 

Available in various sizes and colors.

 

 

If you need other finishes, please contact us.

 

 

 

There are different finishes:

 

·       VELCRO® Adhesive Tape

 

·       Sewable VELCRO® Tape

 

·       VELCRO® heat-weldable tape

 

·       Adhesive VELCRO® Circles (Die-Cut)

 

·       VELCRO® flame retardant tape, FR approved

 

·       Dual VELCRO® strap (double hook & loop strap)

 

 

 

 

SOLBI-MURAL
VEM-TA-50BL
New product

Data sheet

Colour
White
Ancho
50mm
Largo
25m
arrow_upward